This mask is required for use with our Printed Heat Transfer Vinyl. 1 Transfer mask will be included with your order, but you can purchase additional mask if desired.
Sheet sizes are approximately 12" x 12". Size may vary.
The product is Siser TTD Easy Mask. Directions for use are as follows:
Cut a piece of mask slightly wider than the image to cover.
Remove the paper backing from the mask.
Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
Repeat this process in several directions.
Lift a corner of the mask to separate the mask from the image.
VVVVV instruction video here VVVVVV